Comments, Questions, and Answers for Support sub-report using Results> Output Report in AutoPIPE
- Difference between the Support and Restraint output reports
- Membrane stresses at pipe supports are not reported
- During animation of load-case in AutoPIPE, pipe support moved with pipe freely without any opposition
- Load on the support in open gap direction
- Weight of Contents does not appear to be considered
- Why are membrane stresses from pipe support not included?
- Little to no displacement at a Support that has large gaps all around
- Pipe movement exceeds gap distance
- Support forces for Occasional load (i.e. Earthquake) are not evenly distributed among multiple supports
- How are a support's axial force due to xxx load case calculated?
- Support forces = 0.00
- Why local support forces on a global axis not match global forces
- Spring or rigid hangers on vertical legs showing large reaction loads for hydrotest load case
- Preload?
- Are the support forces output calculated with considering the velocity? Answer: No.
- Displacement Mismatch in Global vs Local coordinates (Support report
- Why Thermal Support Loads Exceed 10% of Gravity Despite a 0.1 Friction Coefficient at support?
-
Understanding Support Forces, Moments, and Deformations in AutoPIPE Support Output Report