Note: Please see the following AutoPIPE help section:
Help > Contents> Contents Tab> Reference Information> Code Compliance Calculations> select a piping code to see the calculations performed by AutoPIPE.
Comments, Questions, and Answers about ASME B31.8 Piping Code Calculation Issues
- Code allowable calculation
- Combined stress calculation
- Hoop Stress equation uses thick or thin equation
- Hoop stress per ASME B31.8 2012
- Hoop stress and hoop allowable calculation
- Hydrotest results
- Set the RESTRAINED pipe option
- Stress results are 0.00 in results Grids and output reports
- Bending stresses in the pipe due to large diameter elastic bends ( 1200 m)