Verification Problems for Steel Design Codes


  
 Applies To 
  
 Product(s):STAAD.Pro
 Version(s):All
 Environment: N/A
 Area: Steel Design Solutions
 Subarea: Verifications
 Original Author:

Bentley Technical Support Group

  

This page contains a list of verification problems which were created for various steel design codes. Note that these documents were created for some specific cases, which were not covered in the Verification Examples provided in STAAD.Pro Help. To see the extensive list of those Verification Examples, go to STAAD.Pro Help (File -> Help -> Contents -> Verification Examples).

   Indian code IS800:2007:

  1. [[Section Classification of Laterally unsupported ISMB section]]
  2. [[Tension Capacity Check of Laterally Unsupported ISMB Section]]
  3. [[Compression Capacity Check of Laterally Unsupported ISMB Section]]
  4. [[Shear Capacity Check of Laterally Unsupported ISMB Section]]
  5. [[Moment Capacity Check of Laterally Unsupported ISMB Section]]
  6. [[Interaction Check of Laterally Unsupported ISMB Section]]
  7. [[Slenderness Check of Laterally Unsupported ISMB Section]]
  8. [[Deflection Check of Laterally Unsupported ISMB Section]]
  9. [[Major Axis Bending Capacity of a Web Slender I Section]]
  10. [[STAAD.Pro IS800 2007 Verification Examples]]


    Other international steel design codes:
  1. Compression Capacity verification of RHS (CF) section per Australian steel design code (AS 4100)
  2. Example 2 verification as per SCI P364 (EN 1993-1-1:2005)
  3. Example 3 verification as per SCI P364 (EN 1993-1-1:2005)
  4. Example 4 verification as per SCI P364 (EN 1993-1-1:2005)
  5. Example 9 verification as per SCI P364 (EN 1993-1-1:2005)
  6. Example 10 verification as per SCI P364 (EN 1993-1-1:2005)
  7. Example 11 verification as per SCI P364 (EN 1993-1-1:2005)
  8. Belgian National Annex Verification as per EN 1993-1-1:2005
  9. Validation Problem on Reduced Moment Capacity as per CL6.2.8 of EN 1993-1-1:2005
  10. Validation Problem on Torsion EN 1993-1-1:2005 (EC3)
  11. Russian SP 16.13330 axial check verification
  12. Russian SP 16.13330 bending check verification
  13. [[Minor axis Shear Capacity of I section (AISC 360-10)]]
  14. [[Flexural Strength of a Doubly Symmetric I-shaped section per AISC 360-10 for Compact stiffened and un-stiffened element]]