| Product(s): | ProSteel | ||
| Version(s): | CONNECT Edition (10.XX.00.XX) | ||
| Area: | Detail Style | ||
| Subarea: | Dimensioning tab | ||
| Original Author: | Vyanktesh Nama, Bentley Product Advantage Group |
Overview
This section contains the information related to Dimensioning tab of Detail Style of ProSteel CONNECT Edition. Dimensioning tabs provides important settings for detailing style for drawings. The various tabs in Dimensions group contribute parts, group, assemblies and views.
See Index
- Setting up Drill Diameter on Dimension Line
- How to change the size of Arrow terminators in 2D drawing?
- ProSteel Manual Dimensioning getting slow
- How to Set the spacing for Dimensions?
- How to remove duplicate dimensions in the 2D drawings?
- How to group or ungroup the same dimension in the 2D drawing?
- Adding Label for part groups at dimension line
- Include dimension between construction axis in 2D View drawings
- How to get architecture tick mark for the 2D drawing dimensioning?
- How to manually dimension shortened shapes to get real and true dimensions?
- How to set Coordinate dimension to get dimension value near to object line?
- How to show the diameter value of holes of end plates in the drawing
- The display of diameter value is coming too large in the drawing generated from Detail Center Standard
- How to change the color of the dimension and unit symbol in the drawing
- How to disable outer edge dimensions in a View 2D drawing?
See Also
- ProStructures Help: Dimensioning tab
- Setting the direction of the plate dimensions for 2D drawing.
Dimensioning > Groups > General: