The following resources are provided as a reference by Bentley's Technical Support Group.
Corridor Creation & Manipulation
Video Clips
- Video: Overview of Corridor Modeler Tools
- Video: Corridor Design Overview
- Video: Simple Workflow for Corridor Creation
- Video: Create 3D Automatically
- Video: Using the Template Drop Interval Multiplier in Design Stages
- Video: Overlapping Slopes at Intersections with Relatively Long Cut/Fill Slopes
- Video: Overlay Vertical Adjustment Example
- Video: Preliminary Planning
- Video: Failure of corridor creation using feature Geometry Centerline and how to create corridor automatically using Road Centerline
- Video: Creating a 3D Linestyle for Use in Corridor Modeling
- Video: Traffic Animation
- Video: Pavement Marking Design and Visualization
- Video: Guardrail Modeling
- Video: Import Corridors into OpenRoads
- Video: Introduction to Corridor References
- Video: Corridor References - Point Control Targets Linear Feature
- Video: Corridor References - Template Point Targets Linear Feature
- Video: Corridor References - Point Control Targets Alignment
- Video: Corridor References - End Condition Targets Alignment
- Video: Targeting with End Condition Exceptions and Point Controls
- Video: Modeling Existing Pavement and Proposed Overlay
- Video: Creating a Point Control
- Video: Corridor Profile Assignments
- Video: Assigning a Terrain Model to a Corridor
- Video: Applying Special Ditch Grades and Profiles
- Video: Applying Parametric Constraints
- Video: Applying End Condition Exceptions
- Video: End Condition Transition Example
- Video: Applying a Key Station
- Video: Special Ditch Creation in OpenRoads
- Video: Using Feature Name Overrides
- Video: Target Aliasing and Corridor Clipping
- Video: Export Corridor Objects to CSV
- Video: Target Aliases in SS4 MR1+ (V08.11.09.845+)
- Video: Top Mesh Improvements in SS4 MR1+ (V08.11.09.845+)
- Video: Copy Corridor Features to MicroStation Elements
- Video: Create Transition in Corridor
- Video: Corridor Processing Optimization Tips and Techniques
- Video: Target Special Ditch Profile
TechNotes
Templates
Video Clips
- Video: Angle Distance Constraint
- Video: Building Components in Templates
- Video: Creating Benching End Conditions
- Video: Ditch Construction with Intersecting Slopes
- Video: End Conditions Part 1
- Video: End Conditions Part 2
- Video: Simple Template Creation
- Video: Template Assembly
- Video: Understanding End Conditions
- Video: Understanding Component Display Rules
- Video: Understanding Overlay Components
- Video: Using Display Rules
- Video: Creating a Template from Components
- Video: Applying Shoulder Rollover Lock
- Video: Accessing the Template Library
- Video: Create Transition Between Templates
- Video: Create a Fixed Ditch Component
- Video: Creating a Brow Ditch With Override
- Video: Chimney Drain and Blanket Drain Under Dam/Levee
TechNotes
Superelevation
Video Clips
TechNotes
Cross Sections & End Area Volumes
Video Clips
- Video: Create Cross Sections in SS3
- Video: Dynamic Cross Section View
- Video: Displaying Points in Cross Sections
- Video: Display Right of Way in Cross Sections
- Video: End Area Volumes Overview
- Video: End Area Volumes-Unsuitable Materials, Exceptions, Factors
- Video: End Area Volumes - Classifications
- Video: Computing End Area Volumes for Overlay/Widening
- Video: Navigating Clip Volume
- Video: Turning Off Components to Prevent Displaying in Cross Sections
- Video: Create Cross Section Sheet Annotation
- Video: Display and Annotate Alternate Surfaces in Cross Sections
- Video: Annotate Cross Sections Command
- Video: Cross Section to Surface Workflow